 |
 |
 |
 |
 |
|||
 |
|
||||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||
|
|||||||||||||||||||
|
“Suzuki GSX-R1000” Underbelly exhaust kit
Once again, the TaylorMade team has created a totally unique clean style for your GSXR 1000. Combining high design with race proven engineering, the new K7 kit will blow you away with both looks and performance. Our underbelly muffler is dedicated to maximizing volume in the limited space available under the engine. Similar to our 600/750 Race kit, our K7 underbelly has a fantastic sound that will attract attention without going overboard. Our sleek GP styled tip is attached to a full muffler box. This isn’t just an open pipe stuck on the back of your header! The TaylorMade 2007 GSX-R 1000 kit is a slip on that eliminates the stock box and mufflers saving 20 pounds! That’s better than going on a diet. The kit comes with right and left side carbon fiber trim to blend the stock fairing into that aerodynamic MotoGP style. TaylorMade’s carbon trim is real carbon fiber, not fiberglass or plastic. All trim pieces are solid carbon with a natural lightweight race finish. Pieces will not discolor if left natural but customers building show bikes can paint or clearcoat pieces for a custom finish. On the dyno you can expect a horsepower increase of 6.5 hp @ 7000 rpm and 3 HP at the top end without a power commander. Dynojet themselves, have tested the pipe and gained 9.5 HP @ 7000 rpm – that’s an 11% power increase! We measured sound levels of 105 db at 7000 rpm as compared to 96 db for the stock exhaust. Installation is straightforward. You do not have to cut your bodywork, although you do need to cut a stock bracket under the frame. The kit comes with detailed installation instructions and all mounting hardware. As always, the TaylorMade team is standing by to help with any questions. 818 781 8123.Canisters are also available without trim for those running race bodywork.
|
More Power: + 9 hp
|
|